Plastic container meshing in hypermesh.

-
Title- Meshing of Plastic components in hypermesh pre-processor. 

Aim- To perform meshing of Plastic components in hypermesh pre-processor. 

Objective- 

  1. To perform required geometry cleanup using defeature tab.
  2. To mesh component using 2D elements.

Procedure-

  1. Import geometry file into hypermesh solver deck.



  2. Delete the solids- as we know that meshing can be generated either on solids or surfaces. And it's preferred to use surfaces for meshing.

  3. Mid surface extraction and Geometry cleanup- Extraction of the mid surface with the help of auto-extract feature with offset+planes. Defeature the surface fillets lesser than the element size so fine mesh can be generated.



  4. Meshing-
  • 2D mesh



Conclusion-
  • Mesh is created on a given component.
  • Required element criteria are achieved. 
Author- Shubham Gangadhar Kurhade.
LinedIn- Shubham Kurhade
Contact- 9511846581
Location: Pune, Maharashtra, India

Comments

Post a Comment

Popular posts from this blog

Frame assembly 2D meshing along with connections.

-
Image
 Title- Frame assembly 2D meshing along with connections. Aim- To mesh the Frame assembly with 2D meshing and assigning the proper connection such as spot welds, adhesive, and bolt connection. Objective-  Mesh the assembly. assign material and property. assign the connections. check the connectivity. Procedure- Import the geometry into Hypermesh GUI. Have a thorough look at the geometry; either there are any similarities to reflect the other to reduce the time. Split the geometry with the help of organize tab SHIFT+F11. Transfer the items from the basic model to renamed components for proper consideration and visualisation of the geomtrty. As we can reflect some of the parts we will only mesh remaining. Meshing of the components being as follows- Now we will perform the connection for the assembly such as bolts, spots, and adhesives as per the given criterion. Save the file. Conclusion- Meshing on the frame assembly with 2D meshing is successful. All the connections are a...
Read more

holder clip 2D meshing in Hypermesh

-
Image
 Holder clip is general purpose component used in daily life. Holder clip is a sheet metal component made up of materials such as steel or Mild steel.  Objective- To Mesh the given component as per required criterion. Methodology-   Import the geometry into solver deck Firstly delete the solids in the geometry Now extract the midsurface from the geometry from Geometry panel>midsurface Before going further to mesh component, cleanup is been carried out> deleting the surface and edge fillets from defeature panel. The final mesh is generated as per requirements. Procedure-  Conclusion- Mid surface extraction is successfully carried out. 2D mesh generated fulfills the required parameters. Author- Shubham Gangadhar Kurhade email-  sgkurhade2511@gmail.com LinkedIn-  Shubham Kurhade Contact- 9511846581 
Read more